Our Services
Wheel Balancing
Toll Free call on
Wheel Balancing
Touchscreen wheel balancer with run-out measurement
Vibrations caused by run-out do not depend on the unbalance of wheel. The ER85, with one single quick spin, detects all causes of vibraton. The EMS Sonar, supplied as standard on machine, detects wheel eccentricity with a 0,1 mm accuracy and enables a precise diagnosis within seconds.
Ergonomic design
The ErgoFast range of wheel balancers has been developed to offer the operator the best posssible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
Detection of wheel data
The automatic gauge for distance and diameter input (up to 28? rims) and the LA Sonar device for wheel width measurement allow an immediate detection of all necessary wheel parameters.
Adhesive counter-weights positioning by means of SPOTTER Laser
Wheel locked in position for weight applications, LED light to illuminate working area in the internal part of rim and SPOTTER Laser for accurate positioning of the counter-weights guarantee a perfect balancing operation in one single spin.
Pneumatic locking of wheel
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions (SE Version).
OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
TECHNICAL DATA
Single phase power supply- 115 / 230 V 50 / 60 Hz
Max. absorbed power- 0,15 kW
Balancing speed- 100 rpm
Measuring cycle for 15 kg (33 lb) wheel- 4.7 s
Measurement uncertainty- 0,5 g
Average noise- 70 dB (A)
Rim width setting range- 1.5” ÷ 20” oppure 40 ÷ 510 mm
Rim diameter setting range- 10” ÷ 30” oppure 265 ÷ 765 mm
Min./Max. compressed air pressure- 8 ÷ 10 kg / cm2 | ~ 0.8 ÷ 1 MPa | ~ 8 ÷ 10 bar | ~ 115 ÷ 145 psi
Max. wheel weight- 75 kg
Machine weight- 150 kg
STANDARD EQUIPMENT
